23
Configuration/Serial Port 4 Configuration
Press [Enter] to make settings for the following items:
Serial Port1 (2/3/4) Configuration
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
Serial Port 5 Configuration /Serial Port 6 Configuration
Press [Enter] to make settings for the following items:
Serial Port 5 (6) Configuration
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485].
Mode Speed Select
The optional settings are: [RS232=1Mbps, RS422/RS485=10Mbps];
[RS232/RS422/RS485=250Kbps].
WatchDog Timer
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of [1] to [65535].
WatchDog Timer Unit
The optional settings are: [Sec.]; [Min.].
Case Open Detect
Use this item to detect case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
H/W Monitor
Press [Enter] to view current PC health status & system working status and make
settings for the following sub-items:
