30
master driver). If your hard drive and your system software both support Ultra DMA/33 and
Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive can support. The
settings are: Enabled, Disabled.
3-7-2 Onboard Device Function
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Onboard Device Function
Item Help
LAN Function Enabled
USB Controller Enabled
USB Keyboard Legacy Support Disabled
**Onboard AC97 Codec is ALC201/201A **
AC97 Audio Auto
AC97 Modem Auto
Game Port Address 201
Midi Port Address 330
Midi Port IRQ 10
Menu Level >>
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
LAN Function
This item allows you to enable/disable the LAN Controller to support LAN Function.
The settings are: Enabled, Disabled.
AC97 Audio
This item allows you to decide to enable/disable the chipset family to support AC97 Audio.
The settings are: Enabled, Disabled.
Game Port Address/Midi Port Address
This will determine which Address the Game Port/Midi Port will use.
AC97 Modem
This item allows you to decide to enable/disable the KT-266 chipset family to support AC97
Modem. The settings are: Auto, Disabled.
USB Controller
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have
a USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Legacy Support
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
←
(Only for I407L)
