21
The optional settings are: [Enabled]; [Disabled].
SATA Mode Selection
The optional settings are: [IDE]; [AHCI].
SATA Controller Speed
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are: [Default]; [Gen1]; [Gen2]; [Gen3].
M.2
Port Support
The optional settings are: [Disabled]; [Enabled].
SATA Device Type
The optional settings are: [Hard Disk Drive]; [Solid State Drive].
SATA Port
Port Support
The optional settings are: [Disabled]; [Enabled].
Hot Plug
The optional settings are: [Disabled]; [Enabled].
SATA Device Type
The optional settings are: [Hard Disk Drive]; [Solid State Drive].
►
PCH-FW Configuration
Press [Enter] to see Management Engine Technology Parameters information.
ME FW Image RE-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings are: [Disabled]; [Enabled].
USB Configuration
Press [Enter] to make settings for the following sub-items:
Legacy USB Support
The optional settings are: [Enabled]; [Disabled]; [Auto].
[Enabled]:
To enable legacy USB support.
[Disabled]
: To keep USB devices available only for EFI specification,
[Auto]:
To disable legacy support if no USB devices are connected.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership
change should be claimed by XHCI driver.
