JETWAY G03-NF796-F Скачать руководство пользователя страница 34

Страница: 34 / 55

SATA Configuration

Press [Enter] to make settings for the following sub-items:

SATA Controller(s)

Use this item to enable of disable SATA device.
The optional settings are: [Enabled]; [Disabled].

When set as [Enabled], the following items shall appear:
SATA Mode Selection

This item controls how SATA controller(s) operate.
The optional settings are: [AHCI]; [RAID].

mSATA
Port

Use this item to enable or disable device connected to MSATA port.
The optional settings are: [Disabled]; [Enabled].

SATA1/SATA2/SATA3/SATA4/SATA5
Port

The optional settings are: [Disabled]; [Enabled].
Use this item to enable or disable SATA port.

Hot Plug

Use this item to designate this port as Hot Pluggable.
The optional settings are: [Disabled]; [Enabled].

PCH-FW Configuration

Press [Enter] to view Management Engine technology parameters and make
settings in the following sub-item:

Firmware Update Configuration

Press [Enter] to make settings for

‘

ME FW Image RE-Flash

’

ME FW Image Re-Flash

Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings are: [Disabled]; [Enabled].

* In the case that user needs to update ME firmware, user should set

‘

ME FW

Image Re-Flash

’

as [Enabled], save the settings and exit. The system will turn off

and reboot after 4 seconds. If the user goes to BIOS screen again will find this item
is set again as [Disabled], but user can still re-flash to update firmware next time.

Содержание G03-NF796-F
























































Результаты поиска

Содержание G03-NF796-F

Отзывы:

Похожие инструкции для G03-NF796-F

Бренды по названию

Популярные бренды

JETWAY G03-NF796-F, Техническое руководство

Результаты поиска

Содержание G03-NF796-F

Отзывы:

Похожие инструкции для G03-NF796-F

Бренды по названию

Популярные бренды