JETWAY ALIOTH Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 48

JETWAY ALIOTH Скачать руководство пользователя страница 30

27

The integrated peripheral controller contains an IDE interface with support for two IDE
channels. Select

Enabled

to activate each channel separately. The settings are: Enabled and

Disabled.

Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.

Primary/Secondary Master/Slave UDMA

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33 and
Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector read/write. If
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive can support. The
settings are: Enabled, Disabled.

3-7-2 Onboard Device Function

CMOS Setup Utility – Copyright(C) 1984-2002 Award Software

Onboard Device Function

Item Help

8738 Sound Chip Enabled
USB Controller Enabled
USB Keyboard Legacy Support Disabled
Game Port Address 201
Midi Port Address 330
x Midi Port IRQ 10

Menu Level >>

↑↓→←

Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Game Port Address/Midi Port Address

This will determine which Address the Game Port/Midi Port will use.

USB Controller

Select

Enabled

if your system contains a Universal Serial Bus (USB) controller and you have

a USB peripherals. The settings are: Enabled, Disabled.

USB Keyboard Legacy Support

Select

Enabled

if your system contains a Universal Serial Bus (USB) controller and you have

a USB keyboard. The settings are: Enabled, Disabled.

3-7-3 Onboard Super IO Function

«
...
28
29
30
31
32
...
»

Содержание ALIOTH

















































Отзывы:

Нет отзывов