![JETWAY 939GT2-Ultra Series Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/jetway/939gt2-ultra-series/939gt2-ultra-series_user-manual_4416179027.webp)
IDE Channel 0 Master / Channel 0 Slave / Channel 1 Master / Channel 0 Slave
SATA Channel 1, 2, 3, 4
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications
of your drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If the type of hard disk drives is not matched or
listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If the controller of HDD interface is CD-ROM, the selection shall be “None”
Access Mode
The settings are Auto Normal, Large, and LBA.
Cylinder
number of cylinders
Head
number of heads
Precomp
write precomp
Landing Zone
landing zone
Sector
number of sectors
3-5 Advanced BIOS Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Removable Device Priority Press Enter
Hard Disk Boot Priority Press Enter
Virus Warning Disabled
L1 Cache Enabled
L2 Cache Enabled
Quick Power On Self Test Enabled
SATA &SCSI Boot Order SATA, SCSI
First Boot Device Floppy
Second Boot Device HDD-0
Third Boot Device CDROM
Boot other Device Enabled
Swap Floppy Drive Disabled
Boot Up Floppy Seek Enabled
Boot Up NumLock Status On
Typematic Rate Setting Disabled
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option Setup
APIC Mode Enabled
MPS Version Control For OS 1.4
OS Select For DRAM > 64MB Non-OS2
HDD S.M.A.R.T. Capability Disabled
Report No FDD For Windows Yes
Small Logo (EPA) Show Enabled
Item Help
Menu Level >
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Removable Device Priority
The selection is for you to choose the removable devices (Such as USB floppy or other related
accessories) priorities to boot from.
24