34
Smart FAN Configurations
Please refer to section 3-10-1
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-10-1 Smart FAN Configurations
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Item Help
CPUFAN Smart Mode Disabled
x CPU SmartFAN Full-Speed Temp 50
°
C
x CPU SmartFAN Idle Temp 30
°
C
SFAN1 Smart Mode Disabled
x SFAN1 SmartFAN Full-Speed Temp 35
°
C
x SFAN1 SmartFAN Idle Temp 30
°
C
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU/SFAN1 Smart FAN Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN will
works over 60% of full speed, and the higher temperature will gain higher FAN speed, after
over the temperature which this item setting, the FAN works in full speed.
CPU/SFAN1 Smart FAN Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature lower
than the temperature which you setting.
3-11 Bi-Turbo Configurations
Phoenix – AwardBIOS CMOS Setup Utility
BiTurbo Configurations
Item Help
Bi-Turbo Technology Mode Disabled
Bi-Turbo Activated Threshold 60%(CPU Usage)
Bi-Turbo Activated Time 0.50s Later
Bi-Turbo CPU Clock Setting 202MHz
CPU Thermal-Throttling Disabled
x CPU Thermal-Throttling Temp 85
°
C
x CPU Thermal-Throttling Duty 50.00%
x CPU Thermal-Throttling Beep Enabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
***** When the CPU Host clock is over the CPU default value in Power User OverClock Setting,
BIOS will auto disabled Bi-Turbo function
.
