JETWAY 917GBAR3A Скачать руководство пользователя страница 45

Страница: 45 / 54

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.

Phoenix – AwardBIOS CMOS Setup Utility

Miscellaneous Control

Item Help

CPU Clock Ratio 8

Auto Detect PCI Clk Enabled

Spread Spectrum Disabled

** Current Host/PCI Clock is 133/133Mhz **

Host/PCI Clock at Next Boot 100

** Current DRAM Clock is 166Mhz **

DRAM Clock at Next Boot By SPD (DDR )

CPU Vcore Select Default

VDD1.5V Setting 1.55V

VRAM Settings 1.80V

VRAM Under Voltage Protect Disabled

VDD1.5V Under Voltage Protect Disabled

Flash Part Write Protect Enabled

Menu Level >

↑↓→←

Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Auto Detect PCI Clk

This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.

Spread Spectrum

This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.

Host Clock at Next Boot

This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz

DRAM Clock at Next Boot

This item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:
DDR333 for P4/533MHz CPU, DDR333 /DDR400 for P4/800MHz CPU

CPU Vcore Select

This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from
0.8375V to 1.6V or the Default setting is Default (CPU manufacturer Default setting).

VDD1.5V Settings

This item allows you to select 1.5V of the AGP VGA card. The choice are: Default, 1.5V,
1.6V, 1.7V, 1.8V.

VRAM Settings

This item allows you to select DRAM Voltage. The choice are: 2.55V/2.6V/2.7V/2.8V.

Flash Part Write Protect

This item allows you protect your BIOS chip from Virus destroy data. When Flash BIOS you
have Disabled this item.

Содержание 917GBAR3A























































Результаты поиска

Содержание 917GBAR3A

Отзывы:

Бренды по названию

Популярные бренды

JETWAY 917GBAR3A, Руководство пользователя

Результаты поиска

Содержание 917GBAR3A

Отзывы:

Бренды по названию

Популярные бренды