44
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
CPU Clock Ratio 8
*** Current Host/PCI Clock is 133/33 MHz ***
Host/PCI Clock at Next Boot 133
*** Current DRAM Clock is 166MHz ***
DRAM Clock at Next Boot By SPD(DDR )
CPU Vcore Select Default
VDD1.5V Settings 1.55V
VRAM Settings 1.80V
VRAM Under Voltage Protect Disabled
VDD1.5V Under Voltage Protect Disabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Host Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot
This item allows you select the DRAM Clock for DDR2 533/DDR2 400. The setting are:
By SPD, DDR2 533, DDR2 400
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from
0.8375V to 1.6V or the Default setting is Default (CPU manufacturer Default setting).
VDD1.5V Settings
This item allows you to select 1.5V of the AGP VGA card. The choice are: Default, 1.5V,
1.6V, 1.7V, 1.8V.
VRAM Settings
This item allows you to select DRAM Voltage. The choice are: 2.55V/2.6V/2.7V/2.8V.
3-13 Password Settings
Phoenix – AwardBIOS CMOS Setup Utility
Password Settings
Item Help
Set Supervisor Password Press Enter
Set User Password Press Enter
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
You can set either supervisor or user password, or both of them. The differences are:
Supervisor password:
Can enter and change the options of the setup menus.
