
20
2-5-3 Interrupt Request Table For This Motherboard
Interrupt request are shared as shown the table below:
INT A INT B
INT C
INT D
INT E
INT F
INT G INT H
Slot 1
√
Slot 2
√
Slot 3
√
Slot 4
√
Slot 5
√
Onboard LAN
√
Onboard USB 1
√
Onboard USB 2
√
Onboard USB 3
√
Sound
√
IMPORTANT!
If using PCI cards on shared slots, make sure that the drivers support
“Shared IRQ” or that the cards don’t need IRQ assignments. Conflicts will
arise between the two PCI groups that will make the system unstable or
cards inoperable.
2-5-4 AGP Slot
This motherboard provides an AGP Slot, only support the 1.5V 4X/0.8V 8X AGP VGA card.
Do not use AGP 2X card (3.3V) in this motherboard. It will burn and damage the
motherboard due to
Intel® 865
chipset can not support AGP 2X (3.3V).
IMPORTANT!
Before you plug-in AGP card, please make sure the following notice is
fully understood and practiced. If your AGP card has “AGP 4X notch
(show below) please make sure your AGP card is AGP 4X/8X
(1.5V/0.8V) not AGP 2X (3.3V)
AGP SLOT
2x notch
4x notch