6
Chapter 2
Hardware installation
2-1 Hardware installation Steps
Before using your computer, you had better complete the following steps:
1. Check motherboard jumper setting
2. Install CPU and Fan
3. Install System Memory (DIMM)
4. Install Expansion cards
5. Connect IDE and Floppy cables, Front Panel /Back Panel cable
6. Connect ATX Power cable
7. Power-On and Load Standard Default
8. Reboot
9. Install Operating System
10. Install Driver and Utility
2-2 Checking Motherboard’s Jumper Setting
(1) Keyboard Power On function Enabled/Disabled (3-pin): JP1
When setting Enabled you can using keyboard by key in password to power on system.
Keyboard Power On Setting
2-3 closed K/B Power ON Enabled
JP1
1
3
JP1
1
3
1-2 closed K/B Power ON Disable
(Default)
(2) CPU Frequency Select (3-pin): JP2
CPU Select
JP2
AUTO
1-2 closed
(Default)
100 MHz
2-3 closed
133 MHz
Empty
CPU Frequency Select
100MHz
JP2
1
3
JP2
1
3
AUTO
133MHz
JP2
1
3
(Default)
