background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

25 

Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the 
typematic rate and typematic delay can be selected.  The settings are: Enabled/Disabled.  

Typematic Rate (Chars/Sec) 

Sets the number of times a second to repeat a keystroke when you hold the key down.  The 
settings are: 6, 8, 10, 12, 15, 20, 24, and 30. 

Typematic Delay (Msec) 

Sets the delay time after the key is held down before is begins to repeat the keystroke.  The 
settings are 250, 500, 750, and 1000. 

Security Option 

This category allows you to limit access to the system and Setup, or just to Setup. 

System 

The system will not boot and access to Setup will be denied if the 
correct password is not entered at the prompt. 

Setup 

(default)

 

The system will boot, but access to Setup will be denied if the correct 
password is not entered prompt. 

OS Select For DRAM > 64MB 

Allows OS2

 to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.  

Set to OS/2 if using more than 64MB and running OS/2. 
 

3-6  Advanced Chipset Features 

The Advanced Chipset Features Setup option is used to change the values of the chipset 
registers.  These registers control most of the system options in the computer. 

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software 

Advanced Chipset Features 

 

Item Help 

 

  > DRAM Timing Settings        Press Enter 
    System BIOS Cacheable       Enabled 
    Video RAM Cacheable         Enabled 
    Memory Hole At 15M-16M      Disabled 
    Delay Transaction           Enabled 
    AGP Transfer Mode           Auto 
    AGP Aperture Size           64MB 
     
 

 
  Menu Level > 

↑↓→←

 Move Enter:/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults 

 
DRAM Timing Settings 

Please refer to section 3-6-1 

System BIOS Cacheable 

Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in 
better system performance.  However, if any program writes to this memory area, a system 
error may result.  The settings are: Enabled and Disabled. 

Video RAM Cacheable 

Содержание 845E4

















































Отзывы: