12
Item Help
CyrixIII Clock Ratio Default
Auto Detect DIMM/PCI Clock Enabled
Spread Spectrum Disabled
** Current Host Clock is 66Mhz **
Host Clock at Next Boot is 66Mhz
** Current DRAM Clock is 66Mhz **
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
Menu Level >
CyrixIII CPU Ratio
Adjustment
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
In “Host Clock at Next Boot is” item
By press PageDown/PageUp key you can change the Host clock frequency
When jumper setting 66MHz you can choose 66
∼
99MHz
When jumper setting 100MHz you can choose 100
∼
132MHz
When jumper setting 133MHz you can choose 133
∼
166MHz
2-4 Install Memory
This motherboard provides
two
168-pin DUAL INLINE MEMORY MODULES
(DIMM) sites for memory expansion available from minimum memory size of 32MB
to maximum memory size of 1.0GB SDRAM.
Valid Memory Configurations
Bank
168-Pin DIMM
Total Memory
Bank 0, 1 (DIMM1) SDRAM 32, 64, 128, 256, 512MB
X1
32MB
∼
512MB
Bank 2, 3 (DIMM2) SDRAM 32, 64, 128, 256, 512MB
X1
32MB
∼
512MB
Total
System Memory (Max. 1.0GB)
32MB
∼
1.0GB
NOTE!
Make sure the total installed memory does not exceeds 1.0GB, otherwise
the system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can
refer to figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
