37
3-8-2 Wake up Events
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Wake Up Events
Item Help
VGA OFF
LPT & COM LPT/COM
HDD & FDD ON
DMA/Master OFF
Wake-Up On Ring/LAN(WOL) Disabled
Wake-Up On PCI PME Disabled
Wake-Up RTC Alarm Disabled
Date of Month Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
> IRQs Activity Press Enter
Menu Level >>
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Wak-Up On PCI PME
This will enable the system to wake up by PCI Card.
The settings are: Enabled and Disabled.
Wake-Up On Ring/LAN(WOL)
During Disabled, the system will ignore any incoming call from the modem. During Enabled,
the system will boot up if there’s an incoming call from the modem.
Wake-Up On RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note:
If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
IRQs Activity
Please refer to section 3-8-2.1
