12
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Miscellaneous Control
Item Help
CyrixIII Clock Ratio Default
Auto Detect DIMM/PCI Clock Enabled
Spread Spectrum Disabled
** Current Host Clock is 66Mhz **
Host Clock at Next Boot is 66Mhz
** Current DRAM Clock is 66Mhz **
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
CPU Vcore Select Default
Menu Level >
CyrixIII CPU Ratio
Adjustment
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
By press PageDown/PageUp key you can change the Host clock frequency
When jumper setting
66MHz
you can choose 66
∼
99MHz
When jumper setting
100MHz you can choose 100
∼
132MHz
When jumper setting
133MHz you can choose 133
∼
166MHz
With CPU Vcore Select you choose from –0.05V to +0.30V
2-4 Install Memory
This motherboard provides
three
168-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size of 32MB to maximum
memory size of 1.5GB SDRAM.
Valid Memory Configurations
Bank
168-Pin DIMM
Total Memory
Bank 0, 1 (DIMM1)
SDRAM 32, 64, 128, 256, 512MB
X1
32MB
∼
512MB
Bank 2, 3 (DIMM2)
SDRAM 32, 64, 128, 256, 512MB
X1
32MB
∼
512MB
Bank 4, 5 (DIMM3)
SDRAM 32, 64, 128, 256, 512MB
X1
32MB
∼
512MB
Total
System Memory (Max. 1.5GB)
32MB
∼
1.5GB
NOTE!
Make sure the total installed memory does not exceeds 1.5GB, otherwise the
system may hang during startup.