6
(2) Keyboard Power On function Enabled/Disabled (3-pin): JP1
When setting Enabled you can using keyboard by key in password to power on system.
Keyboard Power On Setting
2-3 closed K/B Power ON Enabled
JP1
1
3
JP1
1 3
1-2 closed K/B Power ON Disable
(Default)
(3) USB Power On function Enabled/Disabled (3-pin): JP6
When setting Enabled you can using USB Device to power on system.
JP6 1-2 closed USB Power On Disabled (Default)
JP6 2-3 closed USB Power On Enabled
JP6
1
3
JP6
1
3
(4) CMOS RAM Clear (3-pin): JP5
A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2
pins of JP5 to store the CMOS data.
To clear the CMOS, follow the procedure below:
1.
Turn off the system and unplug the AC power
2.
Remove ATX power cable from ATX power connector
3.
Locate JP5 and short pins 2-3 for a few seconds
4.
Return JP5 to its normal setting by shorting pins 1-2
5.
Connect ATX power cable back to ATX power connector
Note: When should clear CMOS
1.
Troubleshooting
2.
Forget password
3.
After over clocking system boot fail
