43
This will show the CPU/FAN/System voltage chart and FAN Speed.
Shutdown Temperature
This option is for setting the Shutdown temperature level for the processor. When the
processor reaches the temperature you set, this will shutdown the system.
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Miscellaneous Control
Item Help
Cyrix III Clock Ratio Default
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
** Current Host Clock is 133 Mhz **
CPU Host/SDRAM/PCI Clock 133/133/33(by HW jumper)
CPU Clock Ratio X 3
CPU Vcore Select Default
Vcc3 Select 3.32V(Default)
AGP Vcc3 Select 3.30V(Default)
AGP VDDQ Select 1.5V (Default)
VDIMM Select 3.30V(Default)
Flash Part Write protect Enabled
Menu Level >
CyrixIII CPU Ratio
Adjust
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
CPU/SDRAM/PCI Clock
This item allows you to select the CPU/SDRAM/PCI Clock, refer to
Page 14
.
By press PageDown/PageUp key you can change the CPU Host/SDRAM/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/100/33
∼
99/149/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/100/33
∼
132/132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/133/33
∼
200/200/50MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/100/33
∼
200/151/50MHz
CPU Clock Ratio
This item allows you to select the CPU ratio.
CPU Vcore Select
This item allows you to select Vcore of the CPU. The choice are: +1.475V
∼
+1.825V.
VCC3 Select
This item allows you to select 3.3V of the system. The choice are : 3.32V(Default), 3.20V,
3.29V, 3.40V, 3.42V, 3.50V, 3.52V, 3.63V.