0 3
0 4
Before setting up the system, check that all of the components are included.
3.5mm phone jack audio cable (1)
Audio cable with 3.5mm phone jack on one
end and RCA connectors on the other end (1)
Optical digital cable (1)
+Optical connector (1)
Transmitter with Antenna (1)
+ Pen Type Receiver (1)
USB Power Adapter (1)
Mini USB power cable (1)
+
JI-01 Earphone (1)+ Eartips small (2), large (2)
Components and Accessories
Precautions
Always turn the volume down on your listening device before putting on the
headphones.
Using earphones at high volume can permanently damage your ears. To use
the system safely, please review the following guideline established by the
U.S. Occupational Safety Health Administration (OSHA) on maximum time
exposure to sound pressure levels before hearing damage occurs.
Connect the unit to a power source of the type described in this instruction.
Turn off the unit and unplug the power adaptor from the AC outlet if you are
not going to use the system for a long time. Always grip the power plug, do
not pull on the cord.
Do not expose the transmitter or receiver to direct sunlight, near a heater or
water.
Do not place the system in a location of excessive smoke, dust, mechanical
vibration, humidity, and shock.
Do not place anything on top of the transmitter.
Power sources and placement
Listening safety
Use soft slightly moistened cloth with mild detergent solution. Never use
alcohol, paint thinner or benzene to clean the system as these may damage
the surface.
Cleaning
Permissible Noise Exposures Duration Per Day (Hours)
Sound Level dBA Slow Response
8
6
4
3
2
1 1/2
1
1/2
1/4 or less
90
92
95
97
100
102
105
110
115
