Fig. 2
3.3 Install the arm to the main body by using three screws supplied. (Fig. 3).
Fig. 3
3.4 Dome cover installation
Use two mounting screws supplied, line up to two holes on the body and tighten up. Notice that
you may need a cloth glove to do this as scratches may occur if hard subject touching the dome
cover.
3.5. Cable connection
3.5.1 Connect the power cable labeled with “24V AC” to 24V AC power supply with minimum
1000mA. Warning:
Do not connect the unit to 24V DC or 110V AC or 220V AC as you will damage the unit
instantly!!
