Jetview JE-900 series, Руководство по эксплуатации

Страница: 4 / 15

The special inherent code and it's function
Code Functions Code Functions
130 Set left position 146 Exit Menu
131 Set right position 147 Activate Alarm Function
132 Cruising between two point with L-Speed 148 Disable Alarm Function
133 Cruising between two point with M-Speed 150 Preset Position Restore
134 Cruising between two point with H-Speed 160 Begin L/R limit position setup
135 360 ° cruising with L-Speed 161 Exit L/R limit position setup
136 360 ° cruise with M-Speed 162 Enable default position
137 360 ° cruise with H-Speed 163 Disable Default position
140 Tour group Setup 164 Setup a Default Position
141 Exit Tour group Setup 165 Activate Fog Dispersing
142 Run a tour group 166 Exit Fog Dispersing
145 Enter Camera Block's menu 95 Enter Dome OSD Menu
Note:
1. Code 147,148 is for the camera with alarm function.
2. Code 160, 161 is special for low speed camera
3. Code 165,166 and 95 is for special order
4. above code is fixed and stored in the camera, you must enter the code number and key
“preview”
( some controller named invoke, call or function key) on controller for its function.
The code on the above table is the important details for operation the camera .
3-1
Setup and Preview Preset Positions
The camera can store the current pan, tilt and zoom position with relative number, you can quickly
preview those positions when you needed, Users can use the devices as keyboard controller to save
and preview preset positions fast and conveniently. The JE 900 series speed dome camera can store up
to 128 preset positions.

Setup preset positions
After move (pan, tilt and zoom) the camera to the position you want to monitor, enter a number for
the code of preset position and p
ress the “PRESET” key, then you have done successfully.
Example: Set up preset position No.1
a. Use the joystick to move the dome camera to the desired position.
b.
Enter “1”
c.
Press the “PRESET” key