Jetter JVM-407B-HMI, Руководство пользователя

Страница: 76 / 300

76 Jetter AG
4 Mounting and installation of the JVM-407B
Configuration registers
Configuration registers grant you read or write access to the parameters of the
IP configuration. A range of registers holds the data contained in the
configuration memory. Another range contains the parameters used for
initializing the IP interface.
The register number is calculated by adding the number of the module register
(MR) to the number of the basic register.
HMI Data range Type of
access
Basic register
number
Register
numbers
JVM-407B Configuration
memory
Read/
write
101100 101100 ...
101165
Currently used
parameters
Read only 101200 101200 ...
101265
The following table lists the registers of both ranges and the respective
functions:
Register Function
MR 0 IP address of the device
MR 1 Subnet mask
MR 2
IP address of the gateway to other subnets
MR 3 IP address of the Domain Name Server
MR 32
Type of the automatically generated suffix is attached to the device name
MR 33
through
51
Device name
MR 64 IP port for OS update and communication between devices
MR 65
IP port for debugger/setup in JetSym
 The configuration memory (see page 75)
Introduction
Register numbers
Configuration registers
Related topics