Jetter JC-975MC, Руководство по установке

Страница: 18 / 28

Mode selector S11
Position Description
RUN Once the controller has
booted up, it launches the
STX application program.
STOP The controller boots up, but does not
launch the STX application program.
LOAD Once the controller is energized, it
switches directly to AutoCopy mode.
General purpose LEDs (GP1 ... GP4)
LED Color Description
GP1 (RUN) Green OS is running
GP2 (D1)
Yellow Special states
GP3 (ERR) Red
Error
GP4
Not assigned
States of GP LEDs during boot process
Level GP3 GP2 GP1 Description
1
Restart/reset During this process, the
LEDs ERR indicate various initialization
states before assuming a defined state.
2
Initializing the runtime environment of
the application program and real-time
communication
3
Motion control start
4
Initializing additional functions (Web,
Modbus/TCP etc.)
5
Normal operating condition, application
program is not running.
6
Normal condition; the application
program is being executed
ON OFF OFF
OFF ON OFF
ON ON OFF
ON ON ON
OFF OFF 1Hz
OFF OFF ON