Jetter JC-940MC, Инструкция по установке

Страница: 11 / 16

Setting the IP Address
Step Action
1
Power up the JC-940MC and wait until the OS has been
launched.
2
Establish an Ethernet connection between PC and
JC-940MC.
3
Launch JetSym or JetIPScan on your PC.
4
Select the desired controller from the list.
5
Assign the desired IP parameters to this controller and save
them.
6
If ... ... Then ...
you wish to configure
another controller
proceed with step 4.
you do not wish to configure
another controller
Reboot all configured
controllers.