background image

© 2011 Jetta Corporation

All rights reserved. REV 06/2011

800-288-7771

10

owner’s manual

instructions for optional air bath feature

4 Button Bath Control 

Blower

Light

Increase Speed

Reduce Speed

Stand-alone Blower, Light, Speed Buttons

Please see reverse side for more information.

Blower On - Off

If the Blower is off, press the Blower button once to turn the Blower On at 

its highest speed, or
If the Blower is on, press the Blower button once to turn the Blower Off. 

Increase/Reduce Speed

Press and hold the + or - button to increase or decrease the speed smoothly. 

Modes

 (begin with blower off) 

Press the Blower button twice to put the Blower in Pulse mode, or

Press the Blower button three times to put the Blower in Wave mode.

Light

If you have a light installed, the light can be controlled independently of all 

other features.
Some lighting options have unique operation for color changes.

See the manual for any special light system that may be installed.

Power Up

Upon power up, the LEDs flash as 

the bath control goes through a self 
diagnostic check. Once the LEDs stop 
flashing, you may use the control. 

Session Timer

Turning on a device starts a Session 

Timer that lasts for 30 minutes. 

Optional Heated Quite-Flo Blower

Any time the blower turns on, the 

heater turns on with it.

Control Panel

(90013-RV*) 

(*Rev.  #) 

7 LED Bulb Cluster

(59007-V)

Light Adapter Cable 

4 Pin Din to 2 pin Amp plug 

 (25750)

Cable Bath 8 Pin 

Mini Din 6ft 

(25569)

2” Bath Light 

(59200, Front Access) 

8' Water 

Detect Cable

(99742)

(Optional)

Blower 600w Htr 115v 3spd

(8141-6320)

Bulb Holder with 

 2 pin Amp plug

(59102)

Mood Light

Содержание Water Dance Baths

















Отзывы: