INSTALLATION INSTRUCTIONS | JETTA CORPORATION
PAGE | 6
8. Insert the Drain cap firmly into the
Drain Kit.
9. Secure the Drain Kit to the
subfloor/concrete with screws or
cement.
1.
Install your flooring surface
around the opening of the
Drain Kit.
11. Remove the Drain cap with a channel
lock plier.
12. Apply provided lubricant inside the
Drain kit. Please only proceed with this
step once the pressure test has been
performed, if needed.
13. Affix the appropriate tailpiece to the
waste & overflow. Ensure the
measurement between the base of the
Drain kit and the P-trap will
accommodate the tailpiece.
Warning: Do not cut the brass tailpiece
as this may cause leakage.
© 2019 Jetta Corporation. All rights reserved. REV 04/2019
1(800) 288-7771
