Jetson Zephyr, Руководство пользователя, Страница: 24 / 56

22
1.5
Installing the Handlebar
YOU WILL NEED THE 6MM ALLEN KEY.
1. FLIP THE BIKE UPRIGHT AND PROP IT UP WITH THE KICKSTAND (SEE PAGE 43).
2. LOOSEN BUT DO NOT REMOVE THE BOLT ON THE UNDERSIDE OF THE HANDLEBAR CLAMP BY TURNING IT
COUNTERCLOCKWISE WITH THE 6MM ALLEN KEY FOR 2 - 3 ROTATIONS.
3. ROTATE THE HANDLEBAR WITHIN THE CLAMP UNTIL THE HANDLEBAR CURVES UPWARD OVER THE STEM, AND
THE AREAS WITH THE HAND GRIPS ARE HIGHER THAN THE CENTER OF THE HANDLEBAR.
IMPORTANT: MAKE SURE THAT THE HANDLEBAR REMAINS CENTERED IN THE CLAMP.
4. WHILE HOLDING THE HANDLEBAR IN THE NEW POSITION, TIGHTEN THE BOLT ON THE UNDERSIDE OF
THE HANDLEBAR CLAMP BY TURNING IT CLOCKWISE WITH THE ALLEN KEY.
NOTE: TO ADJUST THE ANGLING OF THE HANDLEBAR AT ANY TIME TO SUIT THE COMFORT OF A RIDER, LOOSEN
THE BOLT, MAKE THE ADJUSTMENT, AND THEN RE-TIGHTEN THE BOLT.
BOLT (ON THE UNDERSIDE)
6MM ALLEN KEY
HANDLEBAR
HAND GRIP
HANDLEBAR CLAMP
STEM