Jetson JPNKY, Руководство пользователя

Страница: 7 / 9

6
Model #: JPNKY | Version #: 032017
MAINTENANCE:
To change the Deck , loosen the six screws
(labeled “ A ”) from the bottom of the deck. Re-
move the deck, and replace with a new deck.
Tighten all six screws back in place before at-
tempting to ride. Once you have replaced the
deck, check the screws after riding to ensure
that they remain tight.
To change the Brakes , loosen the six screws
(labeled “
A
”) from the bottom of the deck.
Then, remove the deck and loosen the two
brake screws (labeled “ B ”). Replace the brake
and tighten the brake screws, then reattach
the deck and tighten all six deck screws.
To change the Steering Spring , loosen the
four screws (labeled “ C ”) from under the front
wheels. Then, remove the mudguard and
loosen the two spring screws (labeled “ D ”).
Pull the spring upwards to remove it. Once
the new spring is inserted, screw in the spring
screws, reattach the mudguard, and tighten
the four screws under the front wheels.
To change the Collar Clamp , loosen the
two screws (labeled “ E ” and “ F ”) on either
side of the Collar Clamp. Then, lift the Collar
Clamp upwards to remove it. Once the new
Collar Clamp has been added, tighten the two
screws on either side of it.
To change the Sliding Sleeve , first remove
the Collar Clamp (as described above). Then,
loosen the two screws (labeled “ G ”) on either
side of the Sliding Sleeve. Then, lift the Collar
Clamp upwards to remove it. Once the new
Collar Clamp has been added, tighten the two
screws on either side of it.