Jetson JLR X Light-Up, Руководство пользователя

Страница: 42 / 46

42
Care & Maintenance
CLEANING THE JLR X
• Carefully wipe with a damp cloth, then dry with a dry cloth.
• Do not use water to clean the JLR X, as the electrical and electronic systems may get wet, resulting in personal injury or
malfunction of the JLR X.
BATTERY
• Keep away from fire and excessive heat.
• Avoid intense physical impact and / or severe vibration.
• Protect from water or moisture.
• Do not disassemble.
• If there are any issues with the battery, please contact Jetson Customer Care. We’d love to help!
STORAGE
• Remove batteries before storing.
• Cover to protect against dust.
• Store indoors, in a dry place and at a suitable temperature.
CHAIN ADJUSTMENT
The chain must remain on the sprockets. If the chain comes off the sprockets, the coaster brake will not operate.
ADJUSTMENT:
• The chain must be at the correct tightness.
• If too tight, the bicycle will be difficult to pedal.
• If too loose, the chain can come off the sprockets.
When the chain (C) is at the correct tightness, you can rotate the crank freely and you can pull it no more than one-half inch
(A) away from a straightedge (B) as shown.
Adjust the tightness of the chain as follows:
• Loosen the axle nuts of the rear wheel.
• Move the rear wheel forward or backward as necessary.
NOTE: Make sure the rear wheel is in the center of the bicycle frame.
• Hold the wheel in this position and tighten the axle nuts.
C
B
A
WARNING
:
Do not attempt chain repairs. If there is a problem with the chain, have a
bicycle service shop make any repairs.