7
Model #: JHUM90 | Version #: 1
ADJUSTING THE BRAKES
There are two types of brakes: the
V Brake
and the
Disc Brake
. You will need a
M5 hexagon tool to adjust both.
To Adjust the V Brake:
Align the brake pads in the
middle of the wheel, and maintain a distance of about
3mm between the wheel and the brake pads. Adjust if
necessary using the nut seen on the left.
Make sure that the brake pads are in line with the curve
of the wheel, and that they can make full contact with
the surface of the steel rim. Use the nut seen on the left
to adjust the alignment.
Test to make sure that both sides of the brakes work. If
only one side makes full contact, use the nut seen on
the left to adjust the brakes.
To Adjust the Disc Brake:
Fix the brake line onto the
disc brake. Maintain a distance of more than 1mm be-
tween the brake disc and the brake pad. If there is any
friction, adjust the nut using the M5 hexagon tool.
