Beginner/Intermediate/Advanced
There are three mode settings that can be selected in the Ride Ready app settings:
Beginner, Intermediate, and Advanced. In order to change skill level, the board needs to
be on and within range, and the user should not be on the pads. Upon selection, you will
hear a beeping sound, confirming your selection.
• Maximum speed in Beginner operating mode: Up to 5 mph **
• Maximum speed in Intermediate operating mode: Up to 7 mph **
• Maximum speed in Advanced operating mode: Up to 10 mph **
**There are a lot of factors, which can affect speed and drive distance, such as the weight
of the driver, weather conditions, terrain, and overall maintenance of the Jetson V6.
Bluetooth
®
Function
Your Jetson V6 is equipped with two Bluetooth
®
:
one for the APP, and one for your Bluetooth
®
speaker. You will need to connect them separately.
To connect to your Bluetooth
®
®
speaker:
1. Turn on the Jetson V6 and it will become
discoverable on your device.
2. To connect, activate your Bluetooth
®
device
in your phone settings.
3. Connect to “Jetson V6 Music” and play your selection.
To connect to the app, on the top left of the app screen, tap the Bluetooth symbol to
display all hoverboards in range. Select your hoverboard (default password is “000000”).
Recalibrating
When the Jetson V6 experiences an error, the running indicator light will remain red,
meaning your Jetson V6 will not operate until it is properly recalibrated. To recalibrate,
follow these steps:
1. Please place your device on a flat, level surface (this is crucial) with the pedals facing up.
2. Press and hold the power button until the lights on the Jetson V6 flash, and you are
notified of a successful calibration
3. Turn off the device and restart the Jetson V6 to complete the recalibration.
Charging the Battery
Your package comes with a built-in, rechargeable lithium battery pack. Before you ride,
you must fully charge the battery with the included UL-certified charger. Always use the
provided charger on your Jetson V6. Be sure to charge the battery in a clean, dry location.
1. Plug one end of the power cord into the Jetson V6, and the other into a grounded AC
outlet. The red charging light on the charger unit will turn on.
2. The charger may take up to 2 hours to complete its charge. The red light on the charger
will turn green once it is finished.
Recharge the Jetson V6 after each use.
4
