Jetson E-PUNK, Руководство пользователя, Страница: 6 / 16

6
CHARGING THE BATTERY
Your E-Punk comes with a rechargeable lithium ion battery. Always use
the provided charger only. The Charging Port is located on the left side
of the battery directly opposite of the Power Button. Please remember
to cover the Charging Port when you are done charging the E-Punk.
Before your first ride you must fully charge the E-Punk - charge for 4
hours for the first 3 times you use it. For every ride after, charge your
E-Punk until it is fully charged, and NOT LONGER. Do not leave any
chargers plugged in overnight, or leave it plugged in past the charge
time.
1. Plug one end of the power cord into a grounded AC outlet and the
other into the E-Punk’s Charging Port. The red charging light on the
charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the E-Punk
after each use.
(Please note: Always plug the charger into the wall first before the
device. If the wall outlet doesn’t have power and you plug the charger
into the device first, it will light green, even if the battery is not full. So
always plug into the wall first to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Don’t use the E-Punk if the battery emits strange odors, overheats,
or begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery.
Do not charge the battery if it has over-discharged. It should be
discarded for your safety. Do not turn on the E-Punk while it is charging.