Jetson DRIFTER, Руководство пользователя

Страница: 9 / 20

9
Your Drifter comes with a built-in rechargeable lead acid battery. Always
use the provided charger only. The Charging Port is located below the
Stem Tube of the Drifter. Please remember to cover the Charging Port
when you are done charging the Drifter. Before your first ride you must
fully charge the Drifter - charge for 4 hours for the first 3 times you use
it. For every ride after, charge your Drifter until it is fully charged, and
NOT LONGER. Do not leave any chargers plugged in overnight, or
leave it plugged in past the charge time.
CHARGING THE BATTERY
1. Plug one end of the power cord into a grounded AC outlet and the
other into the Drifter’s Charging Port. The red charging light on the
charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the Drifter
after each use.
(Please note: Always plug the charger into the wall first before the
device. If the wall outlet doesn’t have power and you plug the charger
into the device first, it will light green, even if the battery is not full. So
always plug into the wall first to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Don’t use the Drifter if the battery emits strange odors, overheats,
or begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery.
Only use the provided charger for the Drifter. Do not charge the battery
if it has over-discharged. It should be discarded for your safety. Do not
turn on the Drifter while it is charging.
Charging
Port