manualshive.com logo in svg

Jetson BREEZE JMY3000-BLK, Руководство пользователя

Поделиться
Скачать
Jetson BREEZE JMY3000-BLK Скачать руководство пользователя страница 23

DISPLAY MODES

• 

CRUISE CONTROL (third mode)

The default setting is Cruise Control off (letter "n" to indicate).
Press  

or        to choose enable Cruise Control

(Letter "Y" to indicate).
Long touch 

to save setting.

Short touch 

to enter first mode.

• TRIP RESET

Reset TRIP by long press 

OTHER DISPLAY MODES ARE:

• 

TRIP- your trip distance since your last trip reset. Press 

to swap.

• ODO - your scooter total distance since its factory assembled, 
or new / repaired battery was placed.
• Battery voltage  - Your battery state.
• Error  - your system has encountered an error. If you need further 
assistance please call us at 1-888-976-9904 or email us at
[email protected].

Please be aware that when using Cruise Control system, 

releasing your thumb from the throttle will not slow you down, 

you may fine yourself in danger or in danger of others.

WARNING!

CRUISE CONTROL

While riding at full speed for more then Ten (10) seconds, the Cruise Control will 

turn on, (If this option is defined in "SETTINGS", it does not come as a default for 

safety reasons).

When Cruise Control is operated, you can release your thumb from the throttle 

and the scooter will continue to ride at full speed.

To slow down, simply apply pressure on one of the brake levers or press the 

throttle again, the Cruise Control will be turned off.

When riding with cruise control and braking, Cruise Control system powers off.

21

THROTTLE OPERATION

Содержание BREEZE JMY3000-BLK









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды