Jets™ Opal Wall Toilet
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. TO615PO
Doc. Rev.: 4 (2019-01-18)
6
Toilet Connections
Installation may vary depending on plumbing arrangements.
General Installation Information
To avoid leakage between the toilet valve and the toilet bowl, it is important that the pipe installation is properly clamped and aligned. Water hoses
must be secured with hose clips.
Installation
General Disclaimer
Drawings provided in the following examples are for illustration purposes only. Product details may vary from your individual purchase.
Installation Instructions
Toilet installation requires the following procedures to be carried out. For more specific technical details, refer to the individual data sheet. For
further information on any of the instructions supplied, any questions regarding installation or the products, please contact your local supplier or
Jets™ Service Department.
1
Prepare the Wall Mounting
Prepare the wall mounting as per the instructions above. Note that the
toilet may be mounted on appropriately positioned pre-existing mounting
bolts, bolts installed for the purpose of mounting this toilet or an
appropriately dimensioned mounting frame.
2
Install the toilet valve and spring
as per the products installation
instructions found in the products
technical data. Note: only for
deliveries supplied without a pre-
installed valve.
3
Move the toilet close to the wall.
Connect the ball valve from the toilet
valve to the water main.
Note: Do not over tighten.
4
Connect the release button to the toilet valve.
For connection information see the installation description provided in
the Release Button's technical data sheet.
5
The toilet is to be positioned with the
mounting bolts through the mounting
holes in the porcelain bowl.
6
When lowering the toilet bowl
into position on the bolts, ensure
that the valve outlet is securely
fitted in the outlet pipe in the wall.
7
Press the toilet firmly into the outlet
pipe to secure the connection.
8
The bowl should be even and
aligned with the wall surface.