3
INSTALLATION MANUAL (Issue n°00 - 20/05/2022)
Ref.
JP CJP 082H - YAMAHA XTZ690 TÉNÉRÉ 700
Assembly Instructions
A)
Unplug the cable from the Intake Air Temperature sensor,
placed on the right side under the display support, and plug it
to the JP ECU using the IAT connection cable, than connect
the other side of the bridge cable to IAT once again.
B)
Connect the T-tap connector to any electrical positive wire,
like the key switch (see sheet aside) or the stop light switch
(see picture below), as much as the negative wire to ground.
