10
Preparing Jetpik for Use.
Before using.
① P
lace one floss capsule into the nozzle (Note that Jetpik will not work without the floss capsule in position).
② Attach the nozzle to the handle.
When using the Jetpik cup supplied - insert the quick connector of the extendable hose on the lower of the cup to the water
inlet on the Jetpik handle as shown and pull the tube to a comfortable length and fill cup with water. (see below Figure 1)
When using in Travel Mode – Insert the quick connector on one side of the water supply tube to the Jetpik handle water inlet.
Use the spool of water supply tube to clip the other end of the tube into a cup or bottle of water. Note – take care to ensure
that the tube remains fully immersed beneath the surface of the water.
(see below Figure 2)
