BarDIMM Pro & BarDIMM Box – Intelligent Barcode Printing System
©2004-2006 Jetmobile
Page 45
QRCode™
QR code is a two-dimensional matrix symbol developed by DENSO
Corporation. It is available in two models—Model 1 and Model 2 (enhanced
version of Model 1). BarDIMM system supports four-level error correction
and a wide range of symbol sizes. BarDIMM can scale the code with the
definition of the small black square height/width.
A QRCode symbol can include numeric and alphanumeric data with high compression,
binary, Kana and Kanji data. Maximum number of characters per QRCode symbol:
OMR
marks
OMR marks are horizontal or vertical black solid
lines found on printed mailing sheets. The mail
processing machines check for these lines on
every page fed in the system. The tracking of
these marks triggers mechanical processes like
the folding of all pages that should be inserted
together in an envelope.
BarDIMM can generate OMR marks used by insertion/folding/Sealing systems found in
mailrooms. Using BarDIMM makes it easy to put those marks in ERP, Unix, DOS or
Windows documents.
There is no standard for OMR marks; specifications vary per machine and per OMR
scanning software (please refer to your mailroom system brochures for your own OMR
marks requirements). But BarDIMM can be parametered to fit any specification.
Marks width, spacing and length can be defined using the b, s and v parameters.
Note:
Some system use thicker marks for start/stop, some use only one type for all marks.
Usage: Only 3 characters can be used in data for OMR: ‘0’, ‘1’ and ‘2’.
1:
Regular mark (thickness defined by the 1
st
parameter for b)
2:
Heavy mark (thickness defined by the 2
nd
parameter for b)
0:
Mark skipped
Marks are defined in the data from top to bottom.
QRCode Model 1 Model 2
Numerics
1,167
7,089
Alphanumerics
707
4,296
8-bit byte char.
486
2,953
Kanji characters
299
1,817
