Page 9
5. Flue & chimney requirements
Location of the appliance and chimney will affect
performance. As shown in Figure xx the chimney should:
• Install through the warm space enclosed by the building
envelope. This helps to produce more draft, especially
during lighting and die down of the fire.
• Penetrate the highest part of the roof. This minimizes the
affects of wind turbulence and down drafts.
• Consider the appliance location in order to avoid floor and
ceiling attic joists and rafters.
• Locate termination cap away from trees, adjacent structures,
uneven roof lines and other obstructions.
Your local dealer is the expert in your geographic area and
can usually make suggestions or discover solutions that will
easily correct your flue problem.
Minimum height of flue system exit
Solid fuel AS/NZS 2918:2018
NOTICE
:
• Chimney performance may vary.
• Trees, buildings, roof lines and wind conditions affect
performance.
• Chimney height may need adjustment if smoking or
overdraft occurs.
NOTICE
: Locating the appliance in a basement or in a location
of considerable air movement can cause intermittent smoke
spillage from appliance.
Do not locate appliance near
• Frequently open doors
• Central heat outlets or returns