Jetmaster 700 Vent Free Built in, Руководство по установке и эксплуатации

Страница: 7 / 12

Installation & Operation manual of Jetmaster Vent Free range
Page 7
Revision 01/09
STEP 2
Locate the outer box into the cavity provided.
For permanent fixing, holes can be drilled through the bottom of the box, to secure it to the structure on which it is
resting. Do not drill any holes closer than 80mm from the front of the box.
GAS BURNER INSTALLATION
It is recommended that the gas supply to the unit be routed through the right hand side panel so that a straight pipe
run to the gas connection can be made. The gas supply can also be routed through the back or bottom panels. An
adequate hole can be drilled in a position that would be hidden by the burner tray.
The gas burner is located into the box, resting on the horizontal flanges of the side panels. Fasten the tray using 4
sets of m4 nuts and bolts.