JETI model SPS 20, Руководство пользователя

Страница: 45 / 80

Elektronic Switch
When you correctly position and hold the magnet on the
target as described, after 1 sec, the green LED will turn on as
a steady light, showing that the electronic switch is ON.
Switching off is done in a similar way. When the magnet
touches the target in the proper orientation again and is
held in place for 1 sec., the green LED turns off and the
system switches OFF.
ON
ON/OFF
LED ON - blinking light indicates magnet range
- steady light indicates switched on condition
key
target
LED On
The switch system remembers its last switch position.
This means that if you switch it on with the magnetic
switch and then disconnect the batteries, it will
automatically return to the on position after you
connect the batteries again. For safety reasons always
switch the system off with the magnetic switch before
removing the supply batteries.
Note
EN
45