JETI model MVario2 Скачать руководство пользователя страница 7

MVario2

3     S

  ettings

 by the 

JETIBOX

The DC/DS transmitter in the "

device explore

r" menu or 

Jetibox

 

can be used to view 10 measured heights (measured after 1s). 
After connecting the power supply (

for 3 seconds

) the 

initialization screen with information about the ERES firmware 
version marked "E" as ERES will be displayed on the Jetibox. This 
time of 

3s

 is also needed to initialize the relative height of the 

sensor. 

Data cannot be read or set in the "Jetibox" emulator 

application in the DC/DS transmitters.

Jetibox menu diagram

:

Use the up and down arrows on the Jetibox to switch between 
the individual screens. Use the left and right arrows to set up the 
values.

EN

3: 92.7   4: 92.2m
5: 91.7   6: 89.7m

7: 86.6   8: 84.9m

9: 85.5   10: 85.2m

Cut-off Altit.

  90m

 →

Cut-off Time

  30s

 →

Motor Off

  1.100sm

 →

Altitude values are only displayed in the sensor 
status Idle or Done. If the values of 10 heights are 
measured as zero, they are not displayed.

The setting is only displayed until it is detected 
throttle deflection pulse on ESC-in.

ERES
Init       v.E2.05

Initialization screen 
with SW version

ERES Idle 93m

1: 90.7   2: 90.8m

Содержание MVario2












Отзывы: