MVario
-4-
SENSOR MENU: ALARMS – by pushing the button D (downward arrow) you will change
to the setup of particular alerts. If an adjusted parameter becomes passed over, the LCD
screen of the JETIBOX will show in the second line of the introduction screen alternately the
original data with the matching alert and the buzzer of the transmitter module will emit the
alert signal. The first tone is the revelation tone and the second one beeps the Morse code of
the chacter representing the corresponding alert. If the alert is in position OFF, the given alert
is switched off.
Vario High Al. – adjustment of the signal representing high climb rate, if the value measured
by the Vario exceeds the set value, the alert will be activated.
Vario low Al. - adjustment of the signal representing high descent rate, if the value measured
by the Vario exceeds the set value, the alert will be activated.
Alti. High Al. - adjustment of the signal representing the relative altitude, if the value of the
relative altitude exceeds the set value, the alert will be activated
Warranty:
For this product we grant a warranty of 24 months from the day of purchase under the
assumption that it has been operated in conformity with these instructions at recommended
voltages and that it has not been damaged mechanically. Warranty and post warranty service
is provided by the manufacturer.
We wish you sucessful flying with the products of:
JETI model s.r.o. P
ř
íbor, www.jetimodel.cz
