JETI model Central Box 200, Руководство пользователя

Страница: 7 / 30

EN
When turning on, connect the batteries first and then turn the
system on via magnetic switch. Keep the same rule when switching
off. First switch the system off via magnetic switch and then
disconnect the batteries.
The Central Box is connected to the power supply, receiver, servos,
controller/controllers and eventually sensors. Please follow the
subsequent general guidelines about proper connection of the
Central Box and these other components.
3.1 Power Supply
The Central Box can be powered from batteries which are directly
connected, from voltage regulators connected to batteries or via
BEC. When selecting power sources for the Central Box, be sure to
follow the minimum power requirements. Together, both power
supplies methods must be able to supply a
15 A continuous and
90A peak current. If the power source is not strong enough, the
overload protection feature of the Central Box may not function
correctly.
The power batteries are connected to the Central Box using MPX
connectors. The Central Box allows up to two batteries to be
connected. During use, the power is actually supplied from the
battery with the higher voltage. If the voltage is the same, the
power can be used from both batteries at the same time. When the
voltage of the batteries is different, the power is not shared and
each pack is isolated from each other. This allows you to use
batteries of different capacity, number of cells, and chemistry type.
If the power for the Central Box is provided only from one battery, it
can be connected via BATT1 or BATT2 input.
3 Connection
7 EN