Jetblack Safety 0-1257/10/PAPER, Установка, эксплуатация и обслуживание

Страница: 4 / 16

GENERAL SAFETY
INFORMATION
2
Please read the following installation, operation and maintenance instructions carefully.
Always ensure that the power is isolated before commencing any maintenance on the
Cleaning Station. This manual is also available from the marked download section of
our website:
www.jetblacksafety.com
WARNING:
The JetBlack Safety Cleaning Station has been designed as an effective dedusting tool
which removes debris and contaminants from clothing and personal protective equipment (PPE)
using high volume low pressure air as a safer alternative to compressed air.
Please note that the removal of debris and contaminants will produce airborne dust. This dust could
be hazardous and present an inhalation risk to the user. Exposure to hazardous dust should be
adequately controlled in line with the Control of Substances Hazardous to Health Regulations 2002
(COSHH). We recommend that users implement suitable and adequate engineering controls for the
airborne dust released such as extraction and the use of a down flow booth, respiratory protective
equipment (RPE) and PPE. Users must wear appropriate eye, ear and respiratory protection at all
times whilst operating the JetBlack Safety Cleaning Station.
The JetBlack Safety Cleaning Station is compliant with the Occupational Safety and Health Act of
1970 (OSHA) when used in conjunction with the OSHA compliant chip guard which is available to
customers.
JetBlack Safety also offers a local exhaust ventilation (LEV) compliant Personnel Cleaning Booth that
extracts and collects dust in a high efficiency particulate air (HEPA) H14 filtered unit.
• Attach the ‘OSHA’ guard provided
to the main nozzle assembly before
operating. This can be easily done by
simply sliding the guard onto the end
of the nozzle
• Never use in a wet environment
• Never allow objects to pass through the
inlet filter whilst the fan is rotating
• Always switch off the unit at the main
electrical supply and disconnect the
plug before performing any cleaning or
maintenance operations on the Cleaning
Station
• Never use a pressure washer or steam
washer to clean the Cleaning Station
• Eye, ear and respiration protection must
always be worn whilst operating
• The Cleaning Station has a thermal shut-
off device for safety purposes. Prolonged
use may cause the unit to shut-off. In this
case, switch the unit off and wait for a few
minutes before re-using
• Please note - the air from the Cleaning
Station will become warm with
prolonged use
General Safety & Operation