Drum height and downward roller pressure are user adjustable to
virtually eliminate snipe.
Patented abrasive take-up fasteners within
the drum make changing abrasive strips
quick and easy. To make installing sanding
strips easier we offer the TufTool
™
(#98-
0060) as an accessory that makes operating
the take-up fastener even easier. Ready-
To-Wrap
™
(pre-cut) abrasive strips in a
wide range of grits are available with
which to fine-tune the JET 16-32 Plus
Drum Sander to best fit your sanding
needs.
The optional TufTool™ (left) makes operating the take-
up clip for the sanding strip easy. The large crank (right)
changes the height of the sanding drum and makes tiny
cut depth changes easy to make with precision.
A large hand crank (with spinner knob) on top of the JET 16-32 Plus Drum Sander
adjusts the height of the drum over the table controlling the actual cut depth. Each full
turn of the crank produces 1/16" of height change for precise sanding thickness control. A
handy scale keeps track of the current depth setting.
Dust Port
The 4”-diameter dust
port molded into the
upper shroud helps
evacuate most of the
dust.
The hinged top cover has a 4”-diameter dust port molded in. When
connected to a good dust collector like the JET DC1100 this system
evacuates virtually all of the considerable amount of dust the JET 16-
32 Plus Drum Sander is capable of making.
Accessories
Infeed/Outfeed Tables
If you frequently work with large pieces of wood we offer
a set of steel infeed outfeed tables. (#98-1601) Each table
is 16 ¾”-wide and 10”-deep and expands the JET 16-32
Plus Drum Sander supporting surface to over 42”!
The extension tables bolt directly to the JET 16-32 Plus
Drum Sander using easy to adjust brackets. Bolt them up,
set them level to the conveyor table and they are ready to support your oversized
material.
The optional extension tables
expand the supporting area to over
42”! The tables come with easy to
install and set up brackets.
