Jet Red Sea Скачать руководство пользователя страница 16

The polarity switches can also be used to create a stereo widening effect, this trick works in both 

Wet Dry Wet and Stereo Parallel FX Loops wiring arraignments. Instead of flipping/keeping both 

polarity switches in the same direction, try flipping just one of the switches and see what happens. 

You'll notice your dry signal goes from a "center panned" kind of sound to a "left / right panned" 

sound which will create a huge stereo widening sound effecting removing your dry signal from the 

middle and placing it in the left and right outputs. There will be some draw backs to using this 

method, which were mentioned above (loss of bass and volume), however the Red Sea can limit 

the effectiveness of these draw backs. Since we have two stereo loops, or a Wet and Dry loop, 

your signal will remain in tact in one loop and inverted in the other loop. As long as the Blend knob 

isn't turned fully counter clockwise the drawbacks will be less noticeable. Also, as you turn the 

knob clockwise, the stereo widening effect becomes less noticeable as you are removing the 

inverted signal from your overall mix.

 

 

 

Содержание Red Sea



































Отзывы: