Jet JWS-10, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 36

6
4.0 Specifications
Table 1
Model number JWS-10
Stock number 727100
Motor and Electricals
Motor Brushed DC, 120V, 1.8A
Power source required 120V AC, single phase, 60Hz
On/off switch rocker style, waterproof
Power cable size 18AWG x 3C SJTW, 6 ft. (182 cm)
Power plug installed 5-15P, 15A, 125V
Recommended minimum circuit size
1
10A
Noise emission
2
Acoustic power, idling 74.0 dB(A)
Acoustic pressure, idling 68.7 dB(A)
Wheels
Stone Wheel size (dia. x width x bore) 10 x 2 x 1/2 in. (250 x 50 x 12 mm)
Stone wheel material single alundum
Stone wheel grit 220
Wheel speed, no load Variable, 90-150 RPM
Honing wheel size (dia. x width) 9 x 1-3/16 in. (230 x 30 mm)
Honing wheel material ABS+, leather tire
Main materials
Arbor SUS-304 Steel
Housing Steel
Knobs and Handle ABS Polymide
Dimensions
Base mounting holes, centers, (WxD) 10X7-7/8in (255X200mm)
Footprint (WxD) 12 x 10.15 in. (305 x 258 mm)
Overall dimensions (LxWxH) 16 x 12 x 13 in. (400 x 300 x 330 mm)
Shipping dimensions (LxWxH) 19-1/2 x 15 x 17 in. (495.3 x 381 x 431.8 mm)
Weights
Net weight 22.5 lb (10.2 kg)
Shipping weight 23.5 lb (10.7 kg)
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.