background image

 

2

 

This manual has been prepared for the owner and operators of a JET Model JWBS-14DX 
Band Saw.  Its purpose, aside from proper machine operation, is to promote safety 
through the use of accepted operating and maintenance procedures. To obtain maximum 
life and efficiency from your band saw, and to aid in using the machine safely, read this 
manual thoroughly and follow all instructions carefully. 

 
 

Warranty & Service 

WMH Tool Group warrants every product it sells.  If one of our tools needs service or repair, one of 
our Authorized Repair Stations located throughout the United States can give you quick service. 
 
In most cases, any one of these WMH Tool Group Repair Stations can authorize warranty repair, 
assist you in obtaining parts, or perform routine maintenance and major repair on your JET, 
Performax, Powermatic or Wilton tools. 
 
For the name of an Authorized Repair Station in your area, call 1-800-274-6848. 
 

More Information 

WMH Tool Group is consistently adding new products to the line.  For complete, up-to-date product 
information, check with your local WMH Tool Group distributor or visit wmhtoolgroup.com. 
 

Limited Warranty 

WMH Tool Group (including JET, Performax, Powermatic and Wilton brands) makes every effort to 
assure that its products meet high quality and durability standards and warrants to the original retail 
consumer/purchaser of our products that each product be free from defects in materials and 
workmanship as follows:  1 YEAR LIMITED WARRANTY ON ALL PRODUCTS UNLESS 
SPECIFIED OTHERWISE.  This warranty does not apply to defects due directly or indirectly to 
misuse, abuse, negligence or accidents, normal wear-and-tear, repair or alterations outside our 
facilities, or to a lack of maintenance. 
 
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, 
FROM THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED 
HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTIBILITY AND FITNESS ARE EXCLUDED. 
SOME STATES DO NOT  ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY 
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN 
NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR 
INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE 
USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION 
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR 
EXCLUSION MAY NOT APPLY TO YOU. 
 
To take advantage of this warranty, the product or part must be returned for examination, postage 
prepaid, to an Authorized Repair Station designated by our office.  Proof of purchase date and an 
explanation of the complaint must accompany the merchandise.  If our inspection discloses a 
defect, WMH Tool Group will either repair or replace the product, or refund the purchase price if we 
cannot readily and quickly provide a repair or replacement, if you are willing to accept a refund. 
WMH Tool Group will return repaired product or replacement at our expense, but if it is determined 
there is no defect, or that the defect resulted from causes not within the scope of our warranty, then 
the user must bear the cost of storing and returning the product.  This warranty gives you specific 
legal rights; you may also have other rights, which vary from state to state. 
 
WMH Tool Group sells through distributors only.  WMH Tool Group reserves the right to effect at any 
time, without prior notice, those alterations to parts, fittings, and accessory equipment which they 
may deem necessary for any reason whatsoever. 
 

Содержание JWBS-14DX





























Отзывы: