2
Assembly
1.
Disconnect the machine from the power source,
unplug.
2.
Mount the rear rail (A, Fig. 1) to the bandsaw
table using two M6x20 hex cap screws, two 1/4"
lock washers and two 1/4" flat washers (B, Fig.
1). Do not tighten.
3.
Mount the front rail (A, Fig. 2) to the bandsaw
table using two M6x20 hex cap screws, two 1/4"
lock washers and two 1/4" flat washers (B, Fig.
2). Do not tighten.
4.
Mount the guide rail (A, Fig. 3) to the front rail
using three M6x20 hex cap screws, three 1/4"
lock washers and three 1/4" flat washers.
5.
Attach the fence to the fence body using four
hex cap bolts, four lock washers and four flat
washers (A, Fig. 4).
