Jet JDP-17DX, Инструкция по эксплуатации и каталог запасных частей

Страница: 5 / 24

5
23. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are
careless acts that can result in serious injury.
24. Maintain a balanced stance at all times so that you do not fall or lean against the spindle or other
moving parts. Do not overreach or use excessive force to perform any machine operation.
25. Use the right tool at the correct speed and feed ra
t
e. Do not force a tool or attachment to do a job for
which it was not designed. The right tool will do the job better and safer.
26. Use recommended accessories; improper accessories may be hazardous.
27. Maintain tools with care. Keep drill bits sharp and clean for the best and safest performance. Follow
instructions for lubricating and changing accessories.
28. Disconnect tools before servicing; when changing accessories, such as blades, bits, cutters and the
like.
29. Make sure the work piece is securely attached or clamped to the table. Never use your hand to hold
the work piece.
30. Turn off the machine before cleaning. Use a brush or compressed air to remove chips or debris —
do not use your hands.
31. Do not stand on the machine. Serious injury could occur if the machine tips over.
32. Never leave the machine running unattended. Turn the power off and do not leave the machine until
it comes to a complete stop.
33. Remove loose items and unnecessary work pieces from the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
Switch Padlock
To safeguard your machine from unauthorized
operation and to avoid accidental starting by
young children, the use of a padlock is highly
recommended. A padlock (stock no. 709012-A)
is available from your local authorized JET
distributor or by calling Walter Meier
(Manufacturing) Inc., at 800-274-6848.
To lock out an on-off switch:
1. Open the padlock (Fig. A).
2. Insert through holes in the start button
(Fig. B).
3. Close the padlock.
4. Place the key in a safe place.
Figure B
Figure A